che
01-03-08, 07:21 PM
http://wanxpon.free.fr/Noobsters2/ide2sdcard.jpg
The IDE To SD (MMC) / MS adapter is an adapter for connecting a SD/MMC memory card to a 2.5" or 3.5" IDE host interface,
aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a SD(MMC)/MS card as an IDE hard drive.
SD(MMC)/MS disks offer the benefit of low power consumption, low operating temperature, no acoustic noise, shock resistance,
and fast read access time.
The IDE To SD (MMC) / MS adapter is transparent to the operating system and does not require any drivers.
With this adaptor, the host PC will identify the inserted SD/MMC card as a standard IDE hard disk.
As such, you can install any operating systems and the SD/MMC card will be bootable.
In such situation, the SD(MMC)/MS is no hot swappable.
Applications
# wind@ws/Linux-based set-top boxes, routers, firewalls
# Diskless network clients, Notebook
# Industrial computers
# Any other device requiring rugged solid-state storage
Features:
# Four PC Card ATA Modes:
- Common Memory Mapped.
- Contiguous I/O Mapped.
- Primary I/O(1Fx) Mapped.
- Secondary I/O(17x) Mapped.
# Compatible with all PC Card Services and Socket Service.
# Automatic sensing of PC Card ATA or true IDE host interface.
# PIO, Multi-word DMA and Ultra DMA host Data transfer support.
# Support 8-bit / 16-bit data transfer on host data bus.
# Integrated PC Card attribute memory of 256bytes(CIS).
# 4 PC Card function registers support.
# Automatic wake up from power-down on host reset or comand write.
# Sector data transfers without microprocessor intervention.
# ATAPI Interface (SSF-8020i and SFF-8070i)
# Fully compatible with MMC system specification 2.0
# Fully compatible with SD Memory Card specification 1.0
# Fully compatible with SDHC Memory Card (Tested with 4GB SDHC)
# Standard MMC Mode Interface support.
# Standard SPI(Serial Programming Interface) Interface(option mode of MMC) for MMC(Multimedia Card) Card.
# Fully compatible with Memory Stick Standard specification 1.2.
# Support Memory Stick Pro 1-bit / 4-bit data transfer
Shipping Worldwide (http://www.gizfever.com/product_info.php?products_id=241)
The IDE To SD (MMC) / MS adapter is an adapter for connecting a SD/MMC memory card to a 2.5" or 3.5" IDE host interface,
aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a SD(MMC)/MS card as an IDE hard drive.
SD(MMC)/MS disks offer the benefit of low power consumption, low operating temperature, no acoustic noise, shock resistance,
and fast read access time.
The IDE To SD (MMC) / MS adapter is transparent to the operating system and does not require any drivers.
With this adaptor, the host PC will identify the inserted SD/MMC card as a standard IDE hard disk.
As such, you can install any operating systems and the SD/MMC card will be bootable.
In such situation, the SD(MMC)/MS is no hot swappable.
Applications
# wind@ws/Linux-based set-top boxes, routers, firewalls
# Diskless network clients, Notebook
# Industrial computers
# Any other device requiring rugged solid-state storage
Features:
# Four PC Card ATA Modes:
- Common Memory Mapped.
- Contiguous I/O Mapped.
- Primary I/O(1Fx) Mapped.
- Secondary I/O(17x) Mapped.
# Compatible with all PC Card Services and Socket Service.
# Automatic sensing of PC Card ATA or true IDE host interface.
# PIO, Multi-word DMA and Ultra DMA host Data transfer support.
# Support 8-bit / 16-bit data transfer on host data bus.
# Integrated PC Card attribute memory of 256bytes(CIS).
# 4 PC Card function registers support.
# Automatic wake up from power-down on host reset or comand write.
# Sector data transfers without microprocessor intervention.
# ATAPI Interface (SSF-8020i and SFF-8070i)
# Fully compatible with MMC system specification 2.0
# Fully compatible with SD Memory Card specification 1.0
# Fully compatible with SDHC Memory Card (Tested with 4GB SDHC)
# Standard MMC Mode Interface support.
# Standard SPI(Serial Programming Interface) Interface(option mode of MMC) for MMC(Multimedia Card) Card.
# Fully compatible with Memory Stick Standard specification 1.2.
# Support Memory Stick Pro 1-bit / 4-bit data transfer
Shipping Worldwide (http://www.gizfever.com/product_info.php?products_id=241)