Mojo
02-25-07, 09:49 PM
graphics tweaks and wot they do. Posting this as a bookmark really, so i dont lose da link. :)
cg_brassTime "x". x sets the amount of time that bullet casings stay visible, the default value is 1250. A setting of 0 disables these & will improve performance a little. I’d recommend doing this for online play, unless you like to see spent ammo on the ground for no useful reason.
cg_drawCrosshair "x". A value of 0 for x will remove the crosshair, which will make aiming making more difficult. 1 (or greater) enables a crosshair (Of varying types). Leave this setting alone.
cg_drawCrosshairNames "x". Setting x to 1 will allow the name of the targeted person or item to appear. 0 will disable this. It’s probably best to set this to 1, particularly in multiplayer games.
cg_drawGun "x". Set x to 1 to enable weapons to be shown on your screen. A setting of 0 will improve FPS but no weapon will be drawn. Visibility will improve a little with this but you’ll want to know what weapon you have. I’d recommend leaving this set to 1.
cg_shadows "x". A setting of 0 disables shadows (recommended). 1 enables, basic, circular shadows. 2 will enable volumetric shadows (You must also set r_stencilbits "8"). Enabling shadows will reduce performance.
r_allowSoftwareGL "x". Set x to 1 to enable Software rendering of the Game. Obviously this should only be used for troubleshooting purposes only. Leave it set to 0 at all other times to use your Graphics Card instead.
CONTINUE>>>> (http://www.techspot.com/tweaks/wolfenstein/rtcw-2.shtml)
cg_brassTime "x". x sets the amount of time that bullet casings stay visible, the default value is 1250. A setting of 0 disables these & will improve performance a little. I’d recommend doing this for online play, unless you like to see spent ammo on the ground for no useful reason.
cg_drawCrosshair "x". A value of 0 for x will remove the crosshair, which will make aiming making more difficult. 1 (or greater) enables a crosshair (Of varying types). Leave this setting alone.
cg_drawCrosshairNames "x". Setting x to 1 will allow the name of the targeted person or item to appear. 0 will disable this. It’s probably best to set this to 1, particularly in multiplayer games.
cg_drawGun "x". Set x to 1 to enable weapons to be shown on your screen. A setting of 0 will improve FPS but no weapon will be drawn. Visibility will improve a little with this but you’ll want to know what weapon you have. I’d recommend leaving this set to 1.
cg_shadows "x". A setting of 0 disables shadows (recommended). 1 enables, basic, circular shadows. 2 will enable volumetric shadows (You must also set r_stencilbits "8"). Enabling shadows will reduce performance.
r_allowSoftwareGL "x". Set x to 1 to enable Software rendering of the Game. Obviously this should only be used for troubleshooting purposes only. Leave it set to 0 at all other times to use your Graphics Card instead.
CONTINUE>>>> (http://www.techspot.com/tweaks/wolfenstein/rtcw-2.shtml)